CM DN 12÷15
Compact diaphragm valve

example-2

The CM is a manually operated diaphragm valve of reduced dimensions and particularly compact structure, ideal for use in confined spaces.

 

MAIN
FEATURES
TECHNICAL CATALOGUE
CAD DRAWINGSINSTALLATION
GUIDE
CERTIFICATIONS 

• Connection system for solvent weld and threaded joints
• Extremely compact construction
• Internal operating components in metal totally isolated from the conveyed fluid
• Valve stem in STAINLESS steel
• Compressor with floating diaphragm support
• Easy to replace diaphragm seal
• Corrosion-proof internal components
• CDSA (Circular Diaphragm Sealing Angle) system offering the following advantages:
  - uniform distribution of shutter pressure on the diaphragm seal
  - reduction in the tightening torque of the screws fixing the actuator to the valve body
  - reduced mechanical stress on all valve components (actuator, body and diaphragm)
  - easy to clean valve interior
  - low risk of the accumulation of deposits, contamination or damage to the diaphragm due to crystallisation
  - operating torque reduction

MAIN FEATURES:

  • Handwheel in PA-GR, completely sealed, high mechanical strength with ergonomic grip for optimum manageability

  • Integrated adjustable torque limiter designed to prevent excessive compression of the diaphragm and always guarantee a minimum fluid flow

  • Optical position indicator supplied as standard

  • Bonnet in PA-GR with STAINLESS steel nuts fully protected by plastic plugs to eliminate zones where impurities may accumulate. Internal circular and symmetrical diaphragm sealing area

  • STAINLESS steel bolts, can also be inserted from above

  • Threaded metal inserts for anchoring the valve

    TECHNICAL CATALOGUE

    CAD DRAWINGS

    USER MANUAL

    CERTIFICATIONS